Wet Plastic Bottle Label Remover for Efficient PET Recycling
This wet label remover strips more than 95% of labels from intact PET bottles before granulation, helping improve PET flake purity and increase overall line efficiency.
By using water during operation, it also helps clean the bottles while moving them forward through the process.
- Removes labels before crushing to reduce contamination in PET flakes.
- Uses water-based separation to improve cleanliness during operation.
- Integrates easily into new or existing PET bottle washing lines.
A More Efficient Recycling Method
Removing labels before granulation lowers contamination in the PET flake stream and reduces the burden on later separation stages.
Cleaner PET Flakes
Pre-removing labels helps improve PET flake purity and supports more stable downstream washing results.
Higher Line Efficiency
Less label contamination after crushing can improve total line throughput and reduce reprocessing.
Working Principle
Jagged knives and an angled rotor tear labels away from bottles, while water sprays carry detached label material into a separate collection path.
Durable Jagged Knives
Imported alloy knives cut and tear labels away from intact PET bottles as they move through the chamber.
Angled Spinning Rotor
The rotor is set at optimized angles to move bottles forward while maintaining label-removal efficiency.
Water-Jet Separation
Water sprays help wash bottles while detached labels are directed into a separate collection path.
Easy Maintenance
The knives can be removed periodically for sharpening and then reinstalled for continued operation.
Warranty & Installation
1-Year Warranty
Each machine includes a 1-year limited warranty on core components.
Installation Support
Engineers can assist with equipment setup, commissioning, and operator training.
Line Integration
The machine can be matched with PET bottle washing lines to improve final PET flake quality and capacity.
Frequently Asked Questions
What is the label removal rate for this machine?
The wet plastic bottle label remover is designed to remove more than 95% of labels from intact PET bottles.
Can this machine handle different types of PET bottles?
Yes. It is designed for a wide range of standard PET beverage bottles, including water and soft drink bottles.
How often do the knives need maintenance?
The alloy knives are durable, but they should be removed periodically for sharpening based on operating volume and bottle type.
Can this machine be integrated into an existing recycling line?
Yes. It can be integrated into new or existing PET bottle washing lines, typically before granulation, to improve PET flake purity and overall line efficiency.
Inquire Now
Send your bottle type, throughput target, and line layout requirements to receive pricing and a tailored recommendation.
